Our Products

Model LP5B lifts are similar in design to the LP5 lifts with additional features to facilitate usage in environments where grit and blast media are present. 

LPI Model LP5 Fully Pneumatic/Hydraulic Personnel Lifts are capable of 3-axis travel.  The lift travels on a guide rail system with the lower rail anchored to the floor and the upper rail mounted to the wall of the booth.  The X-axis travel (left and right movement of the lift) allows the lift to travel back and forth along the length of the booth on a rail system at a variable speed up to 80 feet per minute.    The Z-axis travel (up and down movement of the platform) provides the ability to elevate the operator platform, at a rate of 20 feet per minute, from a lowered position of 20” – 24” above the top of the lower rail to a maximum raised design height of 16’ allowing for an operator working height of up to 22’.   The Y-axis travel (in and out motion of the operator platform) provides the ability to move the operator platform, at a rate of 15 feet per minute, from a retracted position of 3’-6” (as measured from the booth wall to the front of the operator platform) to a fully extended position of 6’-6” (from the booth wall to the front of the operator platform.)  The three axes of travel can be operated either independently or at the same time.

The lift is controlled by the operator from a control console located in the front of the platform, so they are able to face forward and observe the area as they move the lift.  Along with the motion controls for the lift, the console includes an emergency stop button, and an unoiled air supply connection for tools or equipment.

 Applications

• Fall Protection / Safety
• Ergonomic Positioning
• Paint Areas
• Blast Booth - Grit, Sand, Media
• Wash Bays

View Technical Details